How to Resolve HP Printer Print Quality Issues With 123.hp.com/Setup?
HP printers have always been employed massively in home and office settings. The printers are based on technologies that users can fully trust. People use HP printers not only to print but also to fax and scan. However, many users also report the undesirable quality of their printed documents. Some prevalent printer problems include faded text and black ink not printing. Users also complain of fuzzy or blurry text, ink streaks, and similar print quality issues. This article will aid you to resolve these issues easily. Remember that you can always go over to 123.hp.com/setup if you want assistance for any printer set up and software issues.
What Are the Ways to Resolve Print Quality Problems with 123.hp.com/Setup?
There are various troubleshooting steps at your disposal to get rid of print quality problems. Some of the best ways to witness an improved print quality of documents are given below.
Make use of genuine HP printheads and ink cartridges.
According to HP, users should stay away from low-quality ink. The authenticity of non-HP ink is not at all guaranteed by the brand. If you use non-HP ink, it will contaminate the authentic ink from HP that you will add later on. The ink that you use stays in the printhead when it is changed. Hence, the contaminated ink stays in the system and negatively impacts the print quality. Go over to 123.hp.com and see whether the cartridges you are using are authentic or not.
2. Check the levels of ink.
A low amount of ink level can adversely affect the quality of print. To see the levels of ink, go through these steps.
Use the ink tank window to see the ink levels in your printer visually.
Put ink to those tanks that have an ink level that is close or below the minimum fill line.
3. Look for ink smears on your printout’s back.
If you find ink smears on your printout’s backside, then utilise an automated tool to fix this problem. You can follow these points.
Load your paper.
Press and hold the button of Power, then press three times the Cancel button. Then, press eight times the button of Start Copy Colour. After that, release the Power button.
Wait for some time till your page ejects from your printing device before you go ahead and remove it.
Assess the test page.
4. Reinstall your printer driver
If you cannot print black or colour from a Windows system, you should uninstall and reinstall your HP driver. Follow this process.
After removing the printer, visit 123.hp.com/setup.
Install the recent software for your HP printer.
Now print again and see if your issue is resolved.
Conclusion
It's really annoying when the quality of the printed document isn’t up to your expectations. These effective ways will resolve all your HP printer quality issues. Visit 123.hp.com/setup to get in touch with HP printer support experts if you still have any printer-related issues.
Comments
Post a Comment