How To Setup HP Envy 6000 Printer To Print? Browse 123.hp.com/setup

 HP Envy 6000 is an all-in-one profound printer that serves top-notch quality printouts just only after connecting it to Wi-Fi and setting it up accurately. So, if you recently purchased such a printer model for your office premises, it would be better to browse 123.hp.com/setup. The comprehensive tips and tricks to unbox your printer, load a stack of paper, install ink cartridges, and set up a connection via Wi-Fi will be at your fingertips. Thus, visit the printer setup link and learn the fruitful ways in the comfort of your home.

Step-by-Step Procedure To Setup HP Envy 6000 Printer

Setting up HP Envy 6000 Printer won’t only let you print anything, but also is effective in scanning or copying documents. That’s why you are recommended to go to the 123.hp.com site and then work your way around to successfully set up the printer.

Moreover, you can take a brief glance at the below-noted set of instructions to install the printer driver and hence the Wi-Fi setup. Let’s begin to follow:

Step 1: Unbox HP Envy 6000 Printer

· Peel off the entire tap covered on the printer box

·       Now, make sure all the components are available in the box

·       Then, slightly take the HP Envy 6000 out of the box and place it in a surface table

·       Now, plug in the USB cable tightly.

·       After that, switch on your printer by pressing the “Power” button.

Step 2: Load A-4 Size Sheet

·     Now, to load a stack of paper, you just have to step the paper tray out of its position. It is at the bottom of the printer.

·       You can see a clutch on the middle of the tray for size adjustment. So, use it to adjust your paper size.

·       Usually, A-4 sized paper is used in the printer for quality print.

·       Now, place the A-4 size sheets into the paper tray

·       Finally, close the tray.

Step 3: Install Ink Cartridges

·       First, open the cover lid from the top of the printer

·       Now, wait for the chambers to slightly move left

·       Take the ink cartridges from the packaging and remove the shield

·       Now, open the slots and carefully place the ink cartridges one by one

·       Now, press the cover lid downwards to close it.

Now, your HP Envy 6000 printer is ready for setup. Let’s move on to the next step.

Step 4: Setup HP Envy 6000 Printer

·       In your computer, open HP Smart App. If it is not downloaded, download & install it first via 123.hp.com.

·       Now, click on the “+” icon to search for your printer.

·       On the next screen, you will find a “No Printer Found” message.

·       Ignore this message and click on the “Set up a New Printer” tab

·       You can see the “HP Envy 6000” series printer. Give a click on it.

·       In the next window, Connect Printer to Wi-Fi statement is displayed.

·       Simply, enter your Wi-Fi Password in the given field.

·       Then, click the “Continue” blue button.

·       Printer will then start connecting. Go through the on-screen process entirely.

·       Once the Wi-Fi connecting process is done, click the “Continue” button.

·       In the next window, the Alignment required for the best print quality message appears.

·       Click on the “Continue” tab.

·       It will start printing an alignment page to confirm the 123.hp.com/setup process.

·       Now, as the setup is complete, click the “Print a Document” tab.

·       Now, your computer device will send a command to the printer to print a test page.

Hence, the setup is completed!

24x7 Online HP Printer Support For 123.hp.com/setup

Hopefully, your printer has been successfully set up and you are now able to print, scan, or copy your document. If you confront any technical glitches while performing the printer setup process available at 123.hp/setup, talk to us. Dial the HP Printer Support helpline to get associated with the top-most tech specialists to get your printer setup error resolved in a minute.