Set up and Use Your HP Printer Using 123.hp.com

 HP offers a variety of high-performing printer models. Be it their OfficeJet, LaserJet, Envy, or DeskJet range, you won’t find any issues using the device for the long term. One of the common queries of new printer owners is about setting up their printing devices. You can head over to 123.hp.com to learn more about setting up your printer model. 

 

This page has the needed information about setting up printers, downloading drivers, and troubleshooting issues. Read on to learn about the setup and installation process of your HP printer.

 

Set up and Install Printer Using 123.hp.com


Unpack your printer and place it on a hard and stable surface. Now follow this sequence of instructions to set it up.

 

  • Plug the printer into a system that has a good power connection. 

  • Take out the facility cables from the printer box.

  • Now plug back the facility cord to your printer and the computer.

  • Turn on the power switch.

  • The next step is to install the printer cartridges.

  • After a cartridge installation, install the Printer Assistant software. It comes along with your HP printer.

  • Upload the drivers of the machine.

  • Load the input tray with the correct paper. 

 

Download the Correct Printer Driver


The best way to download the drivers of the printing device is by visiting 123.hp/setup page. From this page, you can download the needed drivers and also contact HP Support. Use these steps to download printer drivers for your specific operating system.

 

  • Download HP drivers for your Windows OS.

  1. Ensure that your HP printer is turned on.

  2. It should not have any loose connections.

  3. Navigate to the setup page mentioned above.

  4. From there, download the printer driver compatible with your Windows OS.

  5. Now, navigate to ‘Devices and Printers’ on your system.

  6. Find the correct printer driver from the one available on your screen.

  7. Add the printer and apply the changes.

  8. Confirm the addition of your printer.

  9. Now you can start using your HP printer model.

  • Download HP drivers for Mac OS.

  1. Firstly, go through the setup process described above.

  2. Now, navigate to 123.hp.com.

  3. From here, download the needed drivers.

  4. You may now go to ‘System Preferences’ on your Mac system.

  5. Add the printer to your Mac.

  6. Before giving a print command, check that your printer has been added properly.

  7. Now you can use your HP printer.

 

Installing the HP Printer Assistant 


The HP Printer Assistant is in-built into your printer. Install it through these points.

  • Connect your HP printer to your system.

  • Uninstall the previous printer driver or software.

  • Go to the official HP website and install updated drivers.

  • To do so, select your HP printer model and tap ‘Submit.’

  • Complete the directions on your screen for the software installation.

 

Concluding Words 


Setting up a new HP printer can feel confusing to the average user. But these stepwise instructions will guide you perfectly. If you face any issues midway or cannot follow the guidelines, connect with a printer support expert.

 

Comments

Popular posts from this blog

links

How to get quick HP LaserJet 12320 “123.hp.com/setup” help?

123.hp.com: How to install drivers, scan & configure setup files?