How to Set up HP DeskJet 2600 printer Using 123.hp.com/setup?
If you purchase a new HP Deskjet 2600 printer and don’t know how to set up properly, this guide is for you. Follow the given instructions one by one to easily install your new printer with 123.hp.com/setup. Read on….
Step by Step Instructions For Setting Up Your HP Deskjet Printer
Remove any packaging from your printer before installing the ink cartridges, connecting the power connection, and loading paper into the input tray.
Step1: Move your printer out of the box.
Take the printer out of the box, and then take off any tape, stickers, or other packaging components.
Step 2: plug in the power cord.
1. Attach the printer's power cord to the back, and then plug the other end of the cord into an outlet.
2. To turn on the printer, press the Power button.
The printer's carriage is moved to the printer's center.
3. Await the printer to be silent and unattended before moving on.
Step 3: Install the ink cartridges.
Install the HP ink cartridges that came with your printer in the box.
1. Take one of the ink tanks out of the packaging. Be careful to only touch the ink cartridge's black plastic.
2. Take off the plastic packing tape.
3. Insert the ink cartridge into its slot while holding it by its sides with the contacts facing the printer, and then gently push it in until it snaps into place.
4. Carry out the same procedures to install the second ink cartridge.
5. Close the output tray first, then the door that allows access to the ink cartridges.
Step 4: Fill the input tray with paper.
After installing the ink cartridges, place some plain A4 paper in the input tray.
1. Raise the input tray, first.
2. Completely slide the paper width guide to the left.
3. Fill the input tray with a stack of white paper.
4. Move the paper width guide to the right until the edge of the paper is resting on it.
5. Lower the output tray before extending the tray.
Step 5: Install the printer software.
You can now install the printing software after setting up the HP printer hardware.
HP DeskJet Printer Set Up through HP Smart App
Download the HP Smart app.
Download the HP Smart app for Windows, Mac, Apple iOS, or iPadOS.
1. Access 123.hp.com, the Microsoft Store, or the Mac App Store to download the HP Smart app (Mac).
2. To use all printer features while configuring HP Smart for the first time, you must create or sign in to an HP account.
Use the HP Smart app to configure your printer.
In HP Smart, add your printer, then use the 123.hp/setup instructions to connect it to your computer or mobile device.
1. Get the printer ready for setup if you're setting it up on a Wi-Fi network.
2. On your computer or mobile device, permit Wi-Fi to connect to your network.
3. Turn on Bluetooth on your computer or mobile device so HP Smart can find your printer when you set it up.
4. Once HP Smart for iOS and Android has been installed, turn on the mobile device location service. This will allow the app to utilize your location to find the printer and provide setup advice.
5. Enter Wi-Fi configuration mode for HP Smart and Restore.
6. Equipped with a touchscreen: Select Network setup or Settings from the Wireless o Setup menu, followed by Restore Network Settings.
7. Without a touchscreen display: Use your HP printer's buttons to enter Restore Wi-Fi setup mode and return to the factory default settings.
8. Add the printer once more after closing and reopening HP Smart within two hours.
9. To finish the printer configuration, adhere to the suggested setup screens.
Take Away
Now, from the above guide you can easily set up your HP DeskJet printer using 123.hp.com/setup and also through HP smart app. Hopefully, this guide is helpful to you in installing HP printers quickly.
Comments
Post a Comment