How to perform HP Printer Setup and Installation with 123.hp.com

 HP printers are household devices. However, to make proper use of these machines, you should the way to set up and link them to your network. It’s easy to perform the entire setup process with the help of 123.hp.com. All you require is to correctly unbox your printer. 

This post will lay out all the essential pointers to set up and connect your printing device to your system. 

 

Set up Your HP Printer with 123.hp.com


Start by unboxing your printing machine. Ensure to remove all packing materials from it properly. Now, use the following process to set up and install your printer. 

 

  • Plug the cord of your device into a power outlet. 

  • Hit the Power button on your printing machine.

  • Now, head to the screen of the printer. 

  • Here, input the relevant details such as date, language, and region. 

  • Take out the HP cartridges from their packing. 

  • Access the cartridge door.

  • Insert all the cartridges into their right slots.

  • Use the printer manual if you are unsure of how to install the cartridges. 

  • When they are fully installed, close the cartridge door.

  • Now, load the input tray with A-4 size sheets. 

  • The printer will align the sheets and the cartridges. 

 

Link Your HP Printer to a Wireless Network


You can connect both touchscreen HP printers and those without touchscreen to Wi-Fi. Use the steps below as per your printer model.

 

  • Connect touchscreen HP printers to Wi-Fi.


  1. Turn on your HP wireless printing device.

  2. Hit the ‘Setup’ button on the touchscreen of the device.

  3. After that, tap ‘Network Setup.’

  4. Follow this by choosing ‘Wireless Settings.’

  5. The next step is to touch the ‘Wireless Setup Wizard.’

  6. Your printer will look for wireless routers close by.

  7. Choose your Wi-Fi network.

  8. After that, enter the WEP or WPA passphrase. 

  9. Hit ‘Done.’

  10. Press ‘OK.’

  11. This will confirm the settings.

  12. Press ‘OK’ again to produce a wireless test report.

  13. Your printer has been set up.


  • Connect HP printers without a touchscreen to Wi-Fi


  1. Begin by switching on your HP printer.

  2. Find the ‘Wireless’ button on it.

  3. Press and hold it for three seconds.

  4. The wireless light will start blinking.

  5. In two minutes, press and hold the ‘WPS’ button, which is on the router.

  6. The printer will start establishing a link with your Wi-Fi.

  7. After the wireless light on the printer stops blinking, the connection will be established.

 

Perform the HP Printer Driver Download 


Printer drivers facilitate the printing process to take place. 

 

  • Turn on your system and printer.

  • Now access 123.hp/setup page.

  • Select your OS and the drivers as per your HP printer model.

  • Tap ‘Download’ and adhere to the guidelines to finish the setup.

  • Now install the printer drivers.

  • Launch the setup file and run it. 

  • Tap the ‘Install’ option and adhere to the onscreen guidelines. 

 

Concluding Words


It is quite easy to set up and then install your HP printer with 123.hp.com when you know the right steps. This post lays down all the important guidelines to enable a successful printer setup and connection. If you need more help, connect with a printer technical support service.

 

Comments

Popular posts from this blog

links

How to get quick HP LaserJet 12320 “123.hp.com/setup” help?

123.hp.com: How to install drivers, scan & configure setup files?